FRED MEDART MANUFACTURING CO.

ment, first establish location of the BX box and then the female sockets
(within 15 ft. of the scorer's table). Compute the distance cable is

to travel between each scoreboard and the BX box and add the total of 12
feet. Then compute the distance the single cable is to travel from the
BX box to the female sockets and in this instance add 9 feet. For the "B"
arrangement use the distance that each cable is to travel from scoreboard
to the female sockets and add a total of 12 feet. In each instance you
will, of course, figure the footage of each cable as 2 ft. where double
cable is involved and a single foot where the single line cable is used,
when determining the total amount of additional cable that you will re-
quire.

We would suggest that you indicate on the attached sketch length of each
cable and including the additional amount to be computed as aforementioned
so that we can check your cable specifications.

As aforementioned, a dual board installation has already been completed
and operates perfectly. Extending a cable from each board to an inter-
mediate point is not an absolute necessity, but is suggested since this
scheme provides a means of synchronizing these boards in event that an
adjustment is ever required. We believe this to be as practical a setup
as can be offered.

Cordially yours,

FRED MEDART MANUFAC G co.

*

ented
3
Apparatus & G vision

P.S.-—- Price quoted is guaranteed for a period of 30 days from date.

RWH: MS