' ‘DIRECTIONS FOR ATTACHING THE BENNETT ALL STEEL NET TO BASKETS.

hoop and pass one side of the U hook down and complete as before.

 

   
 

Blace Ui hook on top of hoop as in blue print #1, snap U hook down on
to hoop as in print #2, repeat until you have 12 U hooks on hoop about ,
4 inches apart. Now cut the cord which ties the top of net together |
and open up net,then start at right side of back brace and with all of
net facing you start hanging net by slipping ring up and hang on one
side of U hook continue clockwise until you have the 12 rings on the

 

12 U hooks. Now inspect to see that net hangs freely all around and
evenly psaced. Next starting anywhere slip ring up on U hook about .
=" and with fingers close U hook to position #3 and let ring drop down
to position at bottom of U hook, continue until you have the 12 done
likewise, now with a pair of pliers close all the small loops om bottom
of U hooks and the net will be ready for use, and U hooks will look

like spare which I have tagged and labled spare sample.

 

On hoops which have the solid horizontal back brace the best method to

attach centre U hook rear is to drill a 3/8" hole thru plate just behind

Caution, have all the link joints on outside of net instead of on
the inside. Now play basket ball.

Joseph H. Bennett: ;
20 Richards Street, | s

Worcester, Mass. =